The power windows can be opened and closed when the ignition switch is in ON II*1, using the switches on the doors. The driver's side switches can be used to open and close all of the windows.
The power window lock button on the driver's side must be switched off (not pushed in, indicator off) to open and close the windows from anywhere other than the driver's seat.
When the power window lock button is pushed in, the indicator comes on and you can only operate the driver's window. Turn the power window lock button on when children are in the vehicle.
- Closing a power window on someone's hands or fingers can cause serious injury.
Make sure your passengers are away from the windows before closing them.
WARNING: Always take the ignition key with you whenever you leave the vehicle alone (with other occupants).Models with auto-open/close functionThe power windows can be operated for up to 10 minutes after you turn the ignition switch to LOCK 0*1.
Opening either front door cancels this function.Auto ReverseIf a power window senses resistance when closing automatically, it stops closing and reverse direction.The driver's window auto reverse function is disabled when you continuously pull up the switch.The auto reverse function stops sensing when the window is almost closed to ensure that it fully closes.
To open: Push the switch down firmly.To close: Pull the switch up firmly.
The window opens or closes completely. To stop the window at any time, push or pull the switch briefly.To open: Push the switch down lightly, and hold it until the desired position is reached.To close: Pull the switch up lightly, and hold it until the desired position is reached.
*1:Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
To open: Push the switch down.To close: Pull the switch up.
Release the switch when the window reaches the desired position.
* Not available on all models