Indicators

Name	On/Blinking	Explanation
Parking Brake and Brake System Indicator (Red)	Comes on for a few seconds when you turn the ignition switch to ON II^*1, then goes off if the parking brake has been released. Comes on when the parking brake is applied, and goes off when it is released. Comes on when the brake fluid level is low. Comes on if there is a problem with the brake system. The beeper sounds and the indicator comes on if you drive with the parking brake not fully released.	Comes on while driving - Make sure the parking brake is released. Check the brake fluid level. What to do when the indicator comes on while driving Comes on along with the ABS indicator - Have your vehicle checked by a dealer. If the Brake System Indicator (Red) Comes On
Brake System Indicator (Amber)	Comes on for a few seconds when you turn the ignition switch to ON II^*1, then goes off. Comes on if there is a problem with a system related to braking other than the conventional brake system.	Stays on constantly - Have your vehicle checked by a dealer.
Low Oil Pressure Indicator	Comes on when you turn the ignition switch to ON II^*1, and goes off when the engine starts. Comes on when the engine oil pressure is low.	Comes on while driving - Immediately stop in a safe place. If the Low Oil Pressure Indicator Comes On Diesel models Starting the Engine

*1:Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.

Name	On/Blinking	Explanation
Malfunction Indicator Lamp	Comes on when you turn the ignition switch to ON II^*1, and goes off either when the engine starts or after several seconds if the vehicle did not start. Comes on if there is a problem with the emissions control systems. Blinks when a misfire in the engine's cylinders is detected.	Comes on while driving - Have your vehicle checked by a dealer. Blinks while driving - Stop in a safe place where there are no flammable objects. Stop the engine for 10 minutes or more, and wait for it to cool down. Then, take your vehicle to a dealer. If the Malfunction Indicator Lamp Comes On or Blinks
Charging System Indicator	Comes on when you turn the ignition switch to ON II^*1, and goes off when the engine starts. Comes on when the battery is not charging.	Comes on while driving - Turn off the heating and cooling system/climate control system and rear demister in order to reduce electricity consumption. If the Charging System Indicator Comes On
Seat Belt Reminder Indicator	Comes on and the beeper sounds if you are not wearing a seat belt when you turn the ignition switch to ON II^*1. Blinks while driving if you have not fastened the seat belt. The beeper sounds and the indicator blinks at regular intervals.	The beeper stops and the indicator goes off when you fasten the seat belt. Stays on after you have fastened the seat belt - A detection error may have occurred in the sensor. Have your vehicle checked by a dealer.

*1:Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.

Name	On/Blinking	Explanation
Low Fuel Indicator	Comes on when the fuel reserve is running low (approximately 5.3 Litres left). Blinks if there is a problem with the fuel gauge.	Comes on - Refuel your vehicle as soon as possible. Blinks - Have your vehicle checked by a dealer.
Low Fuel Indicator	Diesel models The fuel gauge dot disappeared.	Even if you depress the accelerator pedal, the engine speed (RPM) will not increase. Refuel your vehicle as soon as possible then restart the engine. The vehicle speed limit will be released when refueling 10.0 litres or more. Fuel Information(Petrol models)Fuel Information(Diesel models)How to Refuel
Supplemental Restraint System Indicator	Comes on for a few seconds when you turn the ignition switch to ON II^*1, then goes off. Comes on if a problem with any of the following is detected: Supplemental restraint system Seat belt tensioner	Stays on constantly or does not come on at all - Have your vehicle checked by a dealer.
Anti-lock Brake System (ABS) Indicator	Comes on for a few seconds when you turn the ignition switch to ON II^*1, then goes off. If it comes on at any other time, there is a problem with the ABS.	Stays on constantly - Have your vehicle checked by a dealer. With this indicator on, your vehicle still has normal braking ability but no anti-lock function. Anti-lock Brake System (ABS)

*1:Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.

Name	On/Blinking	Explanation
Door and Tailgate Open Indicator	Comes on for a few seconds when you turn the ignition switch to ON II^*1, then goes off. Comes on if any door or the tailgate is not completely closed. The beeper sounds and the indicator comes on if any door or the tailgate is opened while driving.	Goes off when all doors and the tailgate are closed.
High Temperature Indicator	Comes on for a few seconds when you turn the ignition switch to ON II^*1, then goes off. Blinks when the engine coolant temperature goes up, and stays on if the temperature continues to rise.	Goes off, then comes on blue when the engine coolant temperature is low. Blinks while driving - Drive slowly to prevent overheating. Stays on while driving - Immediately stop in a safe place and allow the engine to cool. Overheating
Electric Power Steering (EPS) System Indicator	Comes on when you turn the ignition switch to ON II^*1, and goes off when the engine starts. Comes on if there is a problem with the EPS system.	Stays on constantly or does not come on at all - Have your vehicle checked by a dealer. If the Electric Power Steering (EPS) System Indicator Comes On

*1:Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.

Name	On/Blinking	Explanation
Glow Plugs Indicator*	Comes on for a few seconds when you turn the ignition switch to ON II, then goes off. Comes on for a while when you turn the ignition switch to ON II under the extremely low ambient temperature condition, then goes off.	Stays on - The engine is cold. Do not start the engine until the indicator goes off. Starting the Engine Goes off quickly even when ambient temperature is extremely low - Have your vehicle inspected by a dealer.
PGM-FI Indicator*	Comes on for a few seconds when you turn the ignition switch to ON II, then goes off. Comes on while driving if there is a problem with the engine control system.	If the PGM-FI Indicator Comes On
PGM-FI Indicator*	Comes on if you do not use the proper fuel for the climate or regional conditions.	Use of inadequate fuel may reduce engine power. Fuel recommendation
Water in Fuel Indicator*	Comes on when water has accumulated in the fuel system. Comes on if you have parked your vehicle for an extended period.	Have a dealer drain off the water from the system as soon as possible. Accumulated water may cause damage to the fuel system. Have your vehicle checked by a dealer.

Name	On/Blinking	Explanation
Turn Signal and Hazard Warning Indicators	Blinks when you operate the turn signal lever. Blink along with all turn signals if you press the hazard warning button.	Does not blink or blinks rapidly - A turn signal light bulb has blown. Change the bulb immediately. Headlight Bulbs Fog Light Bulbs*Front Turn Signal Light Bulbs Side Turn Signal/Emergency Indicator Light Bulbs Position Lights/Daytime Running Lights Brake Light, Taillight, Back-Up Light and Rear Turn Signal Light Bulbs Taillight Bulbs High-Mount Brake Light Rear Licence Plate Light Bulbs Other Light Bulbs
High Beam Indicator	Comes on when the high beam headlights are on.	—
Lights On Indicator	Comes on whenever the light switch is on.	If you remove the key from the ignition switch, or set the power mode to VEHICLE OFF (LOCK) while the exterior lights are on, a chime sounds when the driver's door is opened.
Fog Light Indicator	Comes on when the fog lights are on.	—

Indicator	Name	On/Blinking	Explanation
	Immobilizer System Indicator	Comes on briefly when you turn the ignition switch to ON II^*1, then goes off. Comes on if the immobilizer system cannot recognize the key information.	Blinks - Models without keyless access system You cannot start the engine. Turn the ignition switch to LOCK 0, pull the key out, and then insert the key and turn it to ON II again. Models with keyless access system You cannot start the engine. Set the power mode to VEHICLE OFF (LOCK), then select the ON mode again. Repeatedly blinks - The system may be malfunctioning. Have your vehicle checked by a dealer. Do not attempt to alter this system or add other devices to it. Electrical problems can occur.

*1:Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.

Name	On/Blinking	Explanation
CRUISE MAIN Indicator*	Comes on when you press the CRUISE button.	Cruise Control*
CRUISE CONTROL Indicator*	Comes on when you have set a speed for cruise control.	Cruise Control*
Keyless Access System Indicator*	Comes on for a few seconds when you set the power mode to ON, then goes off. Comes on as soon as a problem is detected in the keyless access system or keyless starting system.	Stays on constantly or does not come on at all - Have your vehicle checked by a dealer.
Starter System Indicator*	Comes on when you set the power mode to ON, and goes off when the engine starts. Comes on if the starting system has a problem.	As a temporary measure, press and hold the ENGINE START/STOP button for up to 15 seconds while pressing the brake pedal and clutch pedal, and manually start the engine. Have your vehicle checked by a dealer.
Rotate Wheel Indicator*	Comes on when the steering wheel is locked.	Move the steering wheel left and right while pressing the ENGINE START/STOP button.

* Not available on all models

Recommend page

Information Display Warning and Information Messages